1. All 3M Products

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1020H

3M ID 70002019548
  • White, flexo plate mounting tape has the air release feature adhesive which is tolerant to ink contaminates allowing for easy and clean plate removal
  • Proprietary crosshatch design creates unique microchannels in the adhesive that cause air bubbles to disappear from bettwen the tape and plate, meaning faster setup and cleaner print quality
  • Adhesive removes cleanly from print plate and print cylinder
  • Provides high quality medium-firm combination print. The adhesives remove cleanly from the print plate and the print cylinder or sleeve.
 More...
Specifications
Adhesive Type
Differential Acrylate
Air Release
Yes
Backing Material
Polyethylene Foam
Backing Thickness (metric)
0.559 mm
Brand
Cushion-Mount
Composite Sleeves
Yes
Overall Length (Metric)
23 Meter
Overall Thickness (Imperial)
22 mil
Overall Width (Metric)
457 mm
Primary Liner
Polycoated Polyester
Print Quality
Combination Printing - Standard
Print Quality (Series)
10 Series
Product Form
Roll
Total Tape Thickness without Liner (metric)
0.56 mm
Urethane Sleeves
Yes
Details

Our 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1020H with easy mount adhesive is designed for mounting flexographic print plates to cylinders or sleeves. This white foam mounting tape provides high quality standard combination print.

0.020 inch (0.51 mm) double coated foam tape has the air release feature with a plate side adhesive technology designed to resist edge lifting on flexographic print plates

  • White, flexo plate mounting tape has the air release feature adhesive which is tolerant to ink contaminates allowing for easy and clean plate removal
  • Proprietary crosshatch design creates unique microchannels in the adhesive that cause air bubbles to disappear from bettwen the tape and plate, meaning faster setup and cleaner print quality
  • Adhesive removes cleanly from print plate and print cylinder
  • Provides high quality medium-firm combination print. The adhesives remove cleanly from the print plate and the print cylinder or sleeve.
  • Print plates mounted on E1020H will have no air bubbles under the plate due to the air release feature designed into the tape
  • Grooves in the adhesive are created by a cross-hatch pattern from the release liner
  • Plate demounts from the double coated cushioned tape without adhesive residue
  • Tape also removes cleanly from the sleeve or steel print cylinder
  • Flexographic printing, flexographic printers
  • Cushioned flexographic plate mounting sticky back foam tape
The brands listed above are trademarks of 3M.
Change Location
New Zealand - English