1. All 3M Products

3M™ Cushion-Mount™ Plus Plate Mounting Tape L1320

3M ID 70006766425
  • Yellow, flexo plate mounting tape has the air release feature adhesive which is tolerant to ink contaminates allowing for easy and clean plate removal.
  • Proprietary crosshatch design creates unique microchannels in the adhesive that cause air bubbles to disappear from bettwen the tape and plate, meaning faster setup and cleaner print quality.
  • Provides high quality medium-soft combination print. The adhesives remove cleanly from the print plate and the print cylinder or sleeve.
  • L-series plate mounting tapes have a specially formulated adhesive which limits edge lift for a more secure run, even on small repeats
 More...
Specifications
Adhesive Type
Differential Acrylate
Air Release
Yes
Applications
Flexographic Plate Mounting
Backing Material
Polyethylene Foam
Brand
Cushion-Mount™
Colour
Yellow
Composite Sleeves
Yes
Industries
Print
Length
22.86 m
Primary Liner
Polycoated Polyester
Print Quality
Combination Printing - Medium Soft
Print Quality (Series)
13 Series
Product Form
Roll
Thickness
0.56 mm
Total Tape Thickness without Liner (metric)
0.56 mm
Width
457 mm
Details

3M™ Cushion-Mount™ Plus Plate Mounting Tape Yellow, flexographic plate mounting tape has the air release feature adhesive which is tolerant to ink contaminates allowing for easy and clean plate removal.

This 0.020 inch (0.51 mm) double coated foam tape has the air release feature with a plate side adhesive technology designed to remove with less force in the presence of ink contaminates on flexographic print plates.

  • Yellow, flexo plate mounting tape has the air release feature adhesive which is tolerant to ink contaminates allowing for easy and clean plate removal.
  • Proprietary crosshatch design creates unique microchannels in the adhesive that cause air bubbles to disappear from bettwen the tape and plate, meaning faster setup and cleaner print quality.
  • Provides high quality medium-soft combination print. The adhesives remove cleanly from the print plate and the print cylinder or sleeve.
  • L-series plate mounting tapes have a specially formulated adhesive which limits edge lift for a more secure run, even on small repeats
  • Developed for plates that are cleaned with auto-plate washers
  • Tape stays on securely during press runs, yet removes cleanly from the print plate and cylinder afterwards, especially on wide plates
The brands listed above are trademarks of 3M.
Change Location
New Zealand - English