1. All 3M Products

3M™ Cushion-Mount™ Plus Plate Mounting Tape L1920S

3M ID 70006767951
  • Pink, flexo plate mounting tape has the air release feature adhesive which is tolerant to ink contaminates allowing for easy and clean plate removal. For use on urethane sleeves.
  • Proprietary crosshatch design creates unique microchannels in the adhesive that cause air bubbles to disappear from bettwen the tape and plate, meaning faster setup and cleaner print quality.
  • Provides high quality light-medium combination print. The adhesives remove cleanly from the print plate and the print cylinder or sleeve.
  • L-series plate mounting tapes have a specially formulated adhesive which limits edge lift for a more secure run, even on small repeats
 More...
Specifications
Adhesive Type
Differential Acrylate
Air Release
Yes
Applications
Flexographic Plate Mounting
Backing Material
Polyethylene Foam
Brand
Cushion-Mount™
Composite Sleeves
Yes
Industries
Print
Length
22.86 m
Primary Liner
Polycoated Polyester
Print Quality
Combination Printing - Light Medium
Print Quality (Series)
19 Series
Product Form
Roll
Thickness
0.56 mm
Total Tape Thickness without Liner (metric)
0.56 mm
Width
457 mm
Details

3M™ Cushion-Mount™ Plus Plate Mounting Tape Pink, flexographic plate mounting tape has the air release feature adhesive which is tolerant to ink contaminates allowing for easy and clean plate removal. For use on urethane sleeves.

This 0.020 inch (0.51 mm) double coated foam tape has the air release feature with a plate side adhesive technology designed to remove with less force in the presence of ink contaminates on flexographic print plates. For use on urethane sleeves.

  • Pink, flexo plate mounting tape has the air release feature adhesive which is tolerant to ink contaminates allowing for easy and clean plate removal. For use on urethane sleeves.
  • Proprietary crosshatch design creates unique microchannels in the adhesive that cause air bubbles to disappear from bettwen the tape and plate, meaning faster setup and cleaner print quality.
  • Provides high quality light-medium combination print. The adhesives remove cleanly from the print plate and the print cylinder or sleeve.
  • L-series plate mounting tapes have a specially formulated adhesive which limits edge lift for a more secure run, even on small repeats
  • Developed for plates that are cleaned with auto-plate washers
  • Tape stays on securely during press runs, yet removes cleanly from the print plate and cylinder afterwards, especially on wide plates
The brands listed above are trademarks of 3M.
Change Location
New Zealand - English