1. All 3M Products

3M™ Scotch-Weld™ Structural Plastic Adhesive 8005

3M ID 62278614458
  • Ability to structural bond low surface energy plastics such as polyolefins, polypropylene, polyethylene and TPO's.
  • Excellent resistance to water and humidity combined with very good chemical resistance results in a bond that can withstand a variety of applications and conditions
  • Cures at room temperature without heat or other chemicals to eliminate complex adhesion processes.
  • Choose for easy mixing and dispensing, medium viscosity, rigid bonds and more
 More...
Specifications
Adhesive Type
Acrylic
Brand
Scotch-Weld™
Container Size
1.52 fl oz (US)
Full Cure
8-24 Hours @ 72 F (22 C)
Hardness
55-60 Shore D
Indoor/Outdoor
Both
Industries
Automotive, Construction, Electronics, General Industrial, Metalworking, Military, Signage, Specialty Vehicle, Transportation, Woodworking
Open Time
3 minutes @ 72 F (22 C)
Physical Form
Flowable Liquid
Product Form
Each
Product Type
Acrylic Adhesive
Shear Strength at 72 Degrees F (22 Degrees C)
2000 psi
Shelf Life in Months (from date of manufacture)
12
Storage Temperature
40 Degree Fahrenheit
Viscosity
Self-Leveling
Volume (metric)
45 mL
Work Time
3 Minutes
Details

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 is a two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

Creates a Strong Bond on Low Surface Energy Plastics
Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 bonds metals, ceramics, and wood and most other plastics. We also formulate this adhesive with 8 mil spacer beads for bond line spacing.

Recommended Applications

  • Joining plastics to metals, such as in the manufacture or repair of appliances
  • Bonding low surface energy plastics without priming
  • Impact resistance composite bonding
  • Manufacture or repair of various sporting goods equipment
  • Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)

Medium Viscosity Allows Controlled Dispensing
Our 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 3 minute work life. The adhesive reaches handling strength in approximately 3 hour and is fully cured in 24 hours (at 72° F/22° C).

Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.

  • Ability to structural bond low surface energy plastics such as polyolefins, polypropylene, polyethylene and TPO's.
  • Excellent resistance to water and humidity combined with very good chemical resistance results in a bond that can withstand a variety of applications and conditions
  • Cures at room temperature without heat or other chemicals to eliminate complex adhesion processes.
  • Choose for easy mixing and dispensing, medium viscosity, rigid bonds and more
  • 3 minute work life with 3 hours handling strength
The brands listed above are trademarks of 3M.
Change Location
New Zealand - English