1. All 3M Products
  • 3M™ Scotchcast™ Flexinble Power Cable Splice Kit 82-F2
  • 3M™ Scotchcast™ Flexinble Power Cable Splice Kit 82-F2

    3M ID 80611468366
      • MSHA Accepted – carries Mine Safety and Health Administration acceptance 07- KA060002-MSHA
      • 3M™ Scotchcast™ Flame-Retardant Compound 2131 – self-curing resin bonds to itself and most modern cable jackets, and requires no torch or other external heat source; forms a splice or repair that is abrasion resistant and flame retardant
      • Semi-flexible compound – allows “permanent” splice to bend with cable; for installation, handling, reeling, etc.
      • Smooth tapered splice profile – eliminates cable hang-ups and splice end-lifting
       More...
      Specifications
      Cable Type
      multi core, non shielded, rubber insulated reeling cables
      Conductor Sizes
      Single Conductor - 2/0-4/0 AWG
      Connection Max Outside Diameter
      Multiple Conductors - 1.30 inch, Single Conductor - 0.82 inch
      Dielectric Strength (V/mil)
      343 V/mil
      Flame Retardant
      Resin only
      Gel Time
      17 minutes 73°F (23°C)
      Hardness
      82 Shore A
      Indoor/Outdoor
      Both
      Maximum Voltage
      5 Kilovolt
      Model
      Cast Resin
      Product Series
      82-B Series
      Product Technology
      Resin
      Resin Type
      SC 2131
      RoHS 2011/65/EU Compliant
      Yes
      RoHS EU Comments
      RoHS 2011/65/EU compliant without exemption
      *Important RoHS information
      Shelf Life
      36 Month
      Splice Type
      Inline Splice
      Voltage Rating
      0.6/1 kV
      Details

      3M™ Scotchcast™ Flexible Power Cable Splicing Kits 82-F and 82-BF Series are flexible inline and tap splices for use on non-shielded portable power cables and cords. These splices are designed to be used on single or multiple conductor cables, depending on the voltage rating.

      These splice kits are based on 3M™ Scotchcast™ Flame-Retardant Compound 2131 for toughness, flexibility, environmental protection and flame retardancy. The completed splices carry Mine Safety and Health Administration Acceptance 07-KA060002-MSHA when installed in accordance with the included instructions.

      • MSHA Accepted – carries Mine Safety and Health Administration acceptance 07- KA060002-MSHA
      • 3M™ Scotchcast™ Flame-Retardant Compound 2131 – self-curing resin bonds to itself and most modern cable jackets, and requires no torch or other external heat source; forms a splice or repair that is abrasion resistant and flame retardant
      • Semi-flexible compound – allows “permanent” splice to bend with cable; for installation, handling, reeling, etc.
      • Smooth tapered splice profile – eliminates cable hang-ups and splice end-lifting
      The brands listed above are trademarks of 3M.
      Change Location
      New Zealand - English