1. All 3M Products

Scotch-Brite™ Light Grinding and Blending Disc

3M ID 61500292539
  • Grinds and blends in a single step
  • 3M™ ceramic aluminum oxide abrasives cut fast and consistent over the life of the disc
  • Durable construction resists edge wear
  • Scotch-Brite™ material won’t melt on hot welds, allowing blending without waiting
 More...
Specifications
Application Category
Blending/Deburring, Grinding/Metal Stock Removal
Attachment Type
Hook and Loop
Brand
Scotch-Brite™
Center Hole Diameter (Metric)
22.098 mm
Diameter (Metric)
127 mm
Form Type
Right Angle
Health and Safety
Eye Protection, Hearing Protection
Industries
Metalworking, Paint Preparation, Transportation & Heavy Equipment
Max RPM
10000
Mineral Type
Ceramic
Position
Best
Primary Application
Metalworking
Product Form
Disc
Sub Industries
Metal Fabrication
Details

Scotch-Brite™ Light Grinding and Blending Disc uses ceramic abrasive grain blend to achieve a high cut-rate for optimal weld grinding and blending in mild-steel applications. In these instances, light grinding and blending discs are designed to effectively blend and refine a grade 36 scratch or finer.

Designed with a hook and loop attachment and removal system, the no-hole center allows use of more of the disc surface as well as quick and easy disc change-out.Additionally, light grinding and blending discs can often single-handedly prepare surfaces for painting, where a 3 mil or greater paint thickness is being applied, without adding a final dual-action sanding step.Our 3M™ ceramic aluminum oxide abrasive blend is a ceramic mineral designed using one of our proprietary processes to enhance toughness and hardness of the grain for a higher level performance. 3M ceramic aluminum oxide abrasive is engineered to fracture frequently and surpasses aluminum oxide abrasives in both cut-rate and durability. Perfect for moderate to heavy stock removal as well as finishing, ceramic abrasives are built to cut fast and handle intense heat and stress applications.Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.We offer a complete line of hook-and-loop style 3M™ Hookit™ discs for work spaces where adhesive backed discs may become contaminated by dust, dirt, or flying debris. They are often used in applications where a 3M™ Stikit™ disc may be too aggressive, as Hookit™ discs tend to leave finer finishes than adhesive backed discs. Hookit™ sanding discs conveniently and firmly attach to a hook-and-loop backup disc pad (sold separately) on a random orbital sander, can be removed cleanly and easily, and can be re-used again and again for the extent of the abrasive life.

  • Grinds and blends in a single step
  • 3M™ ceramic aluminum oxide abrasives cut fast and consistent over the life of the disc
  • Durable construction resists edge wear
  • Scotch-Brite™ material won’t melt on hot welds, allowing blending without waiting
  • Hook and Loop attachment and removal allows fast disc change-out for multi-step finishing processes
The brands listed above are trademarks of 3M.
Change Location
New Zealand - English