Your form was submitted successfully!
An error has occurred while submitting. Please try again later...
Stand out in the crowd with film series 1080. Choose from a variety of finishes, textures and colours including carbon fibre, that offer a unique, head-turning look.
3M is a leader, not a follower, and we're passionate about offering you the most innovative vehicle personalisation products
Create a look that says you set your own course. Trust that look to the 3M brand promise of quality, reliability, service and warranty.
The cost of a car wrap depends on a couple of factors – the finish you want (gloss, metallic, carbon fibre etc.), the size of your car and the complexity of the design you want. Based on a simple design using standard gloss film, applied to an average sized sedan it would approximately cost:
Full Car Wrap: $3,500-$5,000
Partial Wrap (bonnet, roof etc.): $1,000 - $2,000
Speed Stripes: $500-$1,000
*prices are indicative only. Please see below for product limitations
**for more color and wrap options please try our 3M 1080 wrap tool
Areas repaired with body filler must be sanded, epoxy primed and finished with OEM (Original Equipment Manufacturer) paint or clear coat. Any recently applied finish must be cured for the full amount of time recommended by the paint manufacturer before applying film.
NOTE: All wrap films, including film series 1080, should be applied to a “like new” vehicle finish for the best results. 3M basic product warranty ensures that the product arrives ready to use. Any rust, bubbling, scratches, dents or other damage will be visible through the film, and such surface imperfections may damage the film or cause the film to fail prematurely. 3M recommends using a certified 3M graphics installer to ensure a professional result.
3M is not responsible for any damage or injury caused due to incorrect handling of equipment or vinyl application.