3M™ Wrap Film Series 1080

  • Options available
  • | Select product options for IDs.

Pressure-activated adhesive for easy sliding, tacking, snap up and repositioning

Non-visible, air release channels for fast, easy, bubble-free installations

3.5 mil cast film for easier handling and good conformability and lifting resistance

View more details

Details

Highlights
  • Pressure-activated adhesive for easy sliding, tacking, snap up and repositioning
  • Non-visible, air release channels for fast, easy, bubble-free installations
  • 3.5 mil cast film for easier handling and good conformability and lifting resistance
  • 1.52 m wide for covering larger vehicle parts in one piece

3M™ Wrap Film Series 1080 is a dual cast car wrap film that features a removable, pressure-activated adhesive with non-visible air release channels. The 60-inch width allows you to wrap almost any section of a vehicle without seams.

The material is soft and flexible allowing it to conform to contours and bend easily. The pressure-activated adhesive allows you to slide and reposition the film until you apply firm pressure. The non-visible air release channels assure a fast, easy and virtually bubble-free installation. This material can be used on the interior or exterior of your vehicle such as bonnet, roof, boot, dash parts, mirrors, trims, or you can even wrap the whole exterior of the vehicle. It offers long-term removability from painted surfaces and does not require an over laminate. Which means you can enjoy your personalised look without having to be off the road for too long.NOTE: Areas repaired with body filler must be sanded, epoxy primed and finished with OEM (Original Equipment Manufacturer) paint or clear coat. Any recently applied finish must be cured for the full amount of time recommended by the paint manufacturer before applying film. All wrap films, including film series 1080, should be applied to a “like new” vehicle finish for the best results. 3M basic product warranty ensures that the product arrives ready to use. Any rust, bubbling, scratches, dents or other damage will be visible through the film, and such surface imperfections may damage the film or cause the film to fail prematurely. 3M recommends using a certified 3M graphics installer to ensure a professional result.

Specifications

Resources

Related Products

Surface Finish Glossy, Matte, Satin, Brushed
Colour Gloss Flip Psychedelic, Liquid Copper, Red, White, Orange, Light Ivory, Ember Black, Midnight Blue, Brushed Titanium, Brushed Steel, Sterling Silver, White Aluminum, Blue Fire
Overall Length (Metric) 22.7 Metre, 22.86 Metre