1. New Zealand
  2. All 3M Products
  • Scotch-Brite™ Clean and Strip Disc
  • Scotch-Brite™ Clean and Strip Disc

    13  Products
    • Thin width gets into tight corners for complete cleaning, stripping, and surface prep
    • Provides greater surface area than wire brushes
    • Extra coarse grade silicon carbide provides aggressive cutting and leaves a finish than wire brushes
    • Load and heat resistance offers prolonged operation and consistent finishing results throughout disc life
     More...
    View all details
    Overall Diameter (Metric)
    Overall_Diameter_Metric
    Max RPM
    Max_RPM
    Grade
    Grade
    13 Products Available
     Overall Diameter (Metric), Max RPM  Grade
    All Models
    Close
    Specifications
    Brand
    3M™, Scotch-Brite™
    Center Hole Diameter (Metric)
    16 mm, 22 mm
    Converted Form
    Disc
    Health and Safety
    Eye Protection, Hand Protection, Hearing Protection, Respiratory Protection
    Industries
    Metalworking, Paint Preparation, Transportation & Heavy Equipment
    Max RPM
    12000, 1910, 1916, 1923, 1932, 8500
    Mineral Type
    Silicon Carbide
    Overall Diameter (Metric)
    100 mm, 125 mm, 15 mm, 150 mm, 178 mm
    Position
    Best
    Product Form
    Disc
    Sub Industries
    Metal Fabrication
    Details

    Scotch-Brite™ Clean and Strip Disc is an extra coarse grade, open-web disc engineered to effectively clean welds, remove rust and strip paint. The open construction and aggressive abrasive properties provide a smooth running wheel that resists loading when removing soft coatings.

    The non-woven disc is a safe alternative to wire brushes, offers a greater surface area, and leaves a finer finish, which may eliminate the need for subsequent finishing steps.Scotch-Brite™ Clean and Strip Disc uses extra coarse silicon carbide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminium oxide, it produces a superior finish.Our Scotch-Brite™ industrial abrasives are a unique surface conditioning product with abrasives incorporated into non-woven nylon or other synthetic fibres. Combining abrasives into the fibres creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibres.

    • Thin width gets into tight corners for complete cleaning, stripping, and surface prep
    • Provides greater surface area than wire brushes
    • Extra coarse grade silicon carbide provides aggressive cutting and leaves a finish than wire brushes
    • Load and heat resistance offers prolonged operation and consistent finishing results throughout disc life
    • Smear resistant, non-woven web material provides uniform wear over the life of the disc