3M™ Cushion-Mount™ Plus Plate Mounting Tape E1220
- | Select product options for IDs.
Details
Highlights
- Orange, flexo plate mounting tape with air release feature
- This 0.020 inch (0.51 mm) orange, double coated foam tape has the air release feature to prevent print defects by reducing air bubbles under print plate
- Provides high quality light combination print. Helps ensure proper plate registration
- Flexographic Printing, Flexographic Printers
The 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1220 is a 0.020 inch (0.51 mm) orange, double coated foam tape used in combination flexographic printing. This tape has an air release feature used to effectively mount flexographic print plates to print cylinders.
Provides high-quality, halftone and combination print. The adhesive applies easily and removes cleanly from the print plate and the print cylinder for easy set-up and removal.
Applications • High quality halftone and combination printing
• E-Series adhesive allows easy plate removal
• Wide web flexible packaging
• Combination flexographic printing
• Print plates
• Flexographic print plates
• Adhesion to print cylinders and sleeves
Ease of Use This tape easily adheres to a print sleeve or cylinder allowing a printing plate to be mounted in different positions. Set up is simple; just clean your print plate according to the manufacturer recommendations followed by a 50-50 mixture of isopropyl alcohol-water. Wipe the plate dry with a clean cloth. Apply the plate mounting tape using even hand pressure or use a roller to ensure uniform contact to the cylinder or sleeve. Remove the release liner and apply print plate to the tape. Use a roller to apply pressure while rolling down the plate. Be sure to carefully roll down the leading and trailing edge of the plate. Similarly, removal is clean and easy. The print plate separates cleanly from the tape and the tape removes cleanly from the print sleeve or cylinder to keep operations running smoothly.
Improving the Finished Product Some competitive tapes may leave bubbles or wrinkles which compromise a critical bond between the mounting tape and print plate or between the mounting tape and the sleeve. An air bubble will cause a print defect.
Don’t take the risk of compromising the quality of your finished product. Our 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1220 overcomes this problem with crosshatched grooves in the adhesive formed by the embossed release liner. Unlike flat or pebbled products, our E-series has unique micro-channels in the adhesive that allow air to escape from between the tape and the cylinder, or sleeve; and between the tape and the plate. Air bubbles disappear for virtually bubble-free mounting. This leads to faster set-up and smoother surfaces for cleaner print quality and higher productivity.
Our History of Printing
For decades, 3M products have been at work in paper mills and printing plants helping to improve the quality of finished work while improving production efficiency. From paper web splicing to plate mounting and packaging the finished job, you can rely on 3M for solutions and service throughout your printing operation.
Applications • High quality halftone and combination printing
• E-Series adhesive allows easy plate removal
• Wide web flexible packaging
• Combination flexographic printing
• Print plates
• Flexographic print plates
• Adhesion to print cylinders and sleeves
Ease of Use This tape easily adheres to a print sleeve or cylinder allowing a printing plate to be mounted in different positions. Set up is simple; just clean your print plate according to the manufacturer recommendations followed by a 50-50 mixture of isopropyl alcohol-water. Wipe the plate dry with a clean cloth. Apply the plate mounting tape using even hand pressure or use a roller to ensure uniform contact to the cylinder or sleeve. Remove the release liner and apply print plate to the tape. Use a roller to apply pressure while rolling down the plate. Be sure to carefully roll down the leading and trailing edge of the plate. Similarly, removal is clean and easy. The print plate separates cleanly from the tape and the tape removes cleanly from the print sleeve or cylinder to keep operations running smoothly.
Improving the Finished Product Some competitive tapes may leave bubbles or wrinkles which compromise a critical bond between the mounting tape and print plate or between the mounting tape and the sleeve. An air bubble will cause a print defect.
Don’t take the risk of compromising the quality of your finished product. Our 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1220 overcomes this problem with crosshatched grooves in the adhesive formed by the embossed release liner. Unlike flat or pebbled products, our E-series has unique micro-channels in the adhesive that allow air to escape from between the tape and the cylinder, or sleeve; and between the tape and the plate. Air bubbles disappear for virtually bubble-free mounting. This leads to faster set-up and smoother surfaces for cleaner print quality and higher productivity.
Our History of Printing
For decades, 3M products have been at work in paper mills and printing plants helping to improve the quality of finished work while improving production efficiency. From paper web splicing to plate mounting and packaging the finished job, you can rely on 3M for solutions and service throughout your printing operation.
Typical Properties
Similar products
Current product  3M™ Cushion-Mount™ Plus Plate Mounting Tape E1220 | ||||
|---|---|---|---|---|
| Overall Width (Metric) | 457 mm, 1,371.6 mm | |||
| Application Thickness (Metric) | 0.5 mm | |||
| Colour | Orange | |||
| Backing Material | Polyethylene Foam | |||
| Adhesive Type | Differential Acrylate |
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320, Yellow, 18 in x 36 yd, 20 mil, 1 Roll/Case
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1520, Purple, 18 in x 36 yd, 20 mil, 1 Roll/Case
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1720, Teal, 18 in x 36 yd, 20 mil, 1 Roll/Case