1. New Zealand
  2. All 3M Products
  • Scotch-Brite™ EX2 Deburring Wheel
  • Scotch-Brite™ EX2 Deburring Wheel

    3M ID 61500127099
    • Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
    • Tough, layered, unitized construction can operate clockwise or counterclockwise directions
    • Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
    • Resists smearing for cleaner surfaces and less preparation
     More...
    View all details
    Specifications
    Attachment Type
    Centre Hole
    Brand
    Scotch-Brite™
    Center Hole Diameter (Metric)
    25.4 mm
    Form Type
    Convolute/Deburring
    Industries
    Marine, Metalworking
    Max Speed
    6000 rpm
    Mineral Type
    Silicon Carbide
    Overall Diameter (Metric)
    152.4 mm
    Product Form
    Wheel
    Sub Industries
    Builders Hardware, Medical Instruments, Metal Fabrication, Metal Implants, Plumbing Fixtures, Turbine Engines
    Details

    Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. Our deburring wheel performs best when consistently presented with a sharp edge or metal burrs.

    Our high performance combination of mineral (aggressiveness) and density (hardness) make the Scotch-Brite™ EX2 wheel uniquely suited to applications where a moderate degree of conformability, wheel hardness, and edge retention are needed. A unique resin system helps minimize smearing and reduces heat build-up. The EX2 Deburring Wheel runs cool and resists loading due to its open-web construction. We did this to reduce the risk of part discoloration and warping, while extending the life of the wheel. The EX2 Deburring Wheel is available in fine and medium grade abrasives.

    Our Scotch-Brite™ EX2 Deburring Wheel is available with silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.

    Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

    • Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
    • Tough, layered, unitized construction can operate clockwise or counterclockwise directions
    • Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
    • Resists smearing for cleaner surfaces and less preparation
    • Minimizes heat build up to lessen impact on heat-sensitive materials