1. New Zealand
  2. All 3M Products
  • Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc
  • Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc

    Products
    • Quickly removes heavy rust, thick paint, corrosion and cleans welds
    • Aluminium oxide mineral aggressively removes top layer and cleans to the bare metal underneath
    • High conformability provides a larger contact patch for faster removal rates
    • High-strength fibre resists chunking and performs well on edges
     More...
    View all details
    Overall Diameter (Metric)
    Overall_Diameter_Metric
    Products Available
     Overall Diameter (Metric)
    All Models
    Close
    Specifications
    Overall Diameter (Metric)
    100 mm, 115 mm, 125 mm, 150 mm, 178 mm, 60 mm
    Product Form
    Disc
    Details

    Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc features aluminum oxide abrasive mineral incorporated into an open nylon web. It is designed to remove heavy rust, thick paint and corrosion while also scratching the base material underneath, which can save you time. The highly conformable, high-strength fibres resist chunking and loading, and they perform well on edges.

    Take Advantage of High Conformability
    With its reengineered fiber, the Scotch-Brite™ Clean and Strip XT Pro Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them, and works in hard-to-reach areas without damaging the substrate.

    In addition to its high conformability, the Scotch-Brite™ Clean and Strip XT Pro Disc offers low vibration, decreased chunking, low spark, a high speed rating and long life. That all adds up to a disc you can spin onto your angle grinder with confidence.

    Spongy Web, Sharp Mineral
    To engineer our Scotch-Brite™ Clean and Strip XT Pro Disc, silicon carbide mineral is combined with non-woven nylon fibers using resin. Silicon carbide is a very sharp synthetic mineral commonly used in low-pressure applications like paint prep. The resin bond strengthens the disc and gradually breaks down to reveal new fibers and sharp mineral – delivering a consistent cut over the life of the abrasive.

    The combination of fiber strands, resin and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, minimizing loading of the abrasive.

    Applications

    • Rust removal
    • Paint removal
    • Mill scale removal
    • Coating removal
    • Adhesive removal
    • Surface preparation

    • Quickly removes heavy rust, thick paint, corrosion and cleans welds
    • Aluminium oxide mineral aggressively removes top layer and cleans to the bare metal underneath
    • High conformability provides a larger contact patch for faster removal rates
    • High-strength fibre resists chunking and performs well on edges
    • Resists loading for consistent cutting action
    • High speed rating and low vibration