1. New Zealand
  2. All 3M Products
  • 3M™ Dyneon™ Flouroelastomer FC 2121, 25 KG BOX
  • 3M™ Dyneon™ Flouroelastomer FC 2121, 25 KG BOX

    3M ID 98021117605
    • Broad Chemical Resistance
    • Temperature resistance -18 to 250°C.
    • Low permeation.
    • Broad temperature and chemical resistance for product durability and longevity
     More...
    View all details
    Specifications
    Brand
    Dyneon™
    Capabilities
    Temperature Resistance
    Composition
    Dipolymer made from hexafluoropropylene and vinylidene fluoride
    Compression Set
    20 Percent
    Container Type
    Box
    Cure Technology
    Incorporated Cure
    Fluorine Content
    65.9 Percent
    Industries
    CPI/Semicon, Defense, Electrical, Mining, Oil and Gas, Rubber and Plastic, Transportation
    Manufacturing Segment
    Powertrain
    Mooney Viscosity
    25 Mooney Units
    Net Weight (Metric)
    25 kg
    Post Cure
    24 h @ 260°C
    Press Cure
    5 min @ 177°C
    Product Form
    Slab
    Product Type
    FKM
    Shelf Life
    3 Year
    Specific Gravity
    1.8
    Weight (metric)
    25 kg
    Details

    Cure incorporated 66 percent Fluorine, low viscosity copolymer; can be used for o-rings

    Incorporated Cure Technology3M™ Dyneon™ Fluoroelastomer FC 2123 has a number of favorable attributes that make it suitable for use in injection and transfer molding, extrusion and calendering. It offers broad temperature and chemical resistance for product durability and longevity. Additionally, the proprietary incorporated cure technology may help save time and increase throughput. Dyneon fluoroelastomer FC 2123 can be compounded using standard water-cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2123 should be banded on the mill prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. Offering Different Quantities to Meet the Needs of the JobDifferent quantities are available to meet your needs. Dyneon fluoroelastomer FC 2123 is packaged in slab form and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ib (25.0 kg) boxes. Delivering Custom Solutions3M offers over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering, combined with our expertise in application and product development, translates into greater design flexibility. For decades, we have been able to supply unique solutions to meet the increasing market challenges in developing and producing state-of-the-art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FC 2123 is backed by skilled researchers at several 3M tech service laboratories|| Incorporated Cure Technology3M™ Dyneon™ Fluoroelastomer FC 2123 has a number of favorable attributes that make it suitable for use in injection and transfer molding, extrusion and calendering. It offers broad temperature and chemical resistance for product durability and longevity. Additionally, the proprietary incorporated cure technology may help save time and increase throughput. Dyneon fluoroelastomer FC 2123 can be compounded using standard water-cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2123 should be banded on the mill prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. Offering Different Quantities to Meet the Needs of the JobDifferent quantities are available to meet your needs. Dyneon fluoroelastomer FC 2123 is packaged in slab form and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ib (25.0 kg) boxes. Delivering Custom Solutions3M offers over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering, combined with their expertise in application and product development, translates into greater design flexibility. For decades, 3M has been able to supply unique solutions to meet the increasing market challenges in developing and producing state-of-the-art fluoroelastomer products at the highest quality level. This goes hand-in-hand with their unparalleled commitment to research and customer support. Like all 3M products, 3M™ Dyneon™ Fluoroelastomer FC 2123 is backed by skilled researchers at several 3M tech service laboratories.|| Incorporated Cure Technology3M™ Dyneon™ Fluoroelastomer FC 2123 has a number of favorable attributes that make it suitable for use in injection and transfer molding, extrusion and calendering. It offers broad temperature and chemical resistance for product durability and longevity. Additionally, the proprietary incorporated cure technology may help save time and increase throughput. Dyneon fluoroelastomer FC 2123 can be compounded using standard water-cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2123 should be banded on the mill prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. Offering Different Quantities to Meet the Needs of the JobDifferent quantities are available to meet your needs. Dyneon fluoroelastomer FC 2123 is packaged in slab form and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ib (25.0 kg) boxes. Delivering Custom Solutions3M offers over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering, combined with their expertise in application and product development, translates into greater design flexibility. For decades, 3M has been able to supply unique solutions to meet the increasing market challenges in developing and producing state-of-the-art fluoroelastomer products at the highest quality level. This goes hand-in-hand with their unparalleled commitment to research and customer support. Like all 3M products, 3M™ Dyneon™ Fluoroelastomer FC 2123 is backed by skilled researchers at several 3M tech service laboratories.

    • Broad Chemical Resistance
    • Temperature resistance -18 to 250°C.
    • Low permeation.
    • Broad temperature and chemical resistance for product durability and longevity