1. New Zealand
  2. All 3M Products
  3. Filtration & Separation
  4. Filter Cartridges & Media
  5. Pleated Membrane Cartridges
  6. 3M™ Betafine™ DP Series DP30PP100BA , 30 in, 10 micron Filter Cartridge, 1 /Carton

3M™ Betafine™ DP Series DP30PP100BA , 30 in, 10 micron Filter Cartridge, 1 /Carton

3M ID 70020045509
  • Pleated Media for Increased Capacity & Long Service Life Betafine™ DP series pleated polyropylene filters and capsules are available with absolute ratings from 0.2 to 70 microns. The all polypropylene filter is used extensively on corrosive and non-corrosive process fluids where broad chemical compatibility is required.
  • The vast surface area of the pleated filter matrix provides increased flow, high contaminant loading capacity and low initial pressure drop. This construction permits the use of smaller housings and reduced capital expenditure.
  • Betafine DP series filter cartridges are ideally suited for high flow, low viscosity fluids.
  • Betafine™ DP series pleated polypropylene filters are available with absolute ratings from 0.2 to 70 microns. The all polypropylene filter is used extensively on corrosive and non-corrosive process fluids where broad chemical compatibility is required.
 More...
View all details
Specifications
Applications
Final Filtration for Particulates in Soft Drinks, Particle Reduction in Bottle Water Manufacturing, Particle Reduction in Distilled Spirits Filtration, RO Protection and Prefiltration, Solids Removal, Solids Removal, Recovery & Reclaim, Turbidity and Particle Control in Soft Drink Water, Water Filtration for Beer Applications, Water Filtration for Wine Applications
Brand
Betafine™
End Modification
Bayonet lock, single open end (226 O-ring & spear)
Filter Material
Polypropylene
Filter Type
Surface
Gasket/O-ring Material
Silicone
Industries
Industrial
Maximum Operating Temperature (Celsius)
80 Degree Celsius
Micron Rating
10 μm
Overall Diameter (Metric)
6.7 cm
Overall Length (Metric)
76.2 cm
Pleat Type
Pleated Media
Pressure Range (metric)
Recommended change-out differential pressure: 2.4 bar @ 25 deg C
Product Series
DP
Product Type
Cartridge
Series
Betafine™ DP Series
Details

Pleated Membrane Filters and Capsules

  • Pleated Media for Increased Capacity & Long Service Life Betafine™ DP series pleated polyropylene filters and capsules are available with absolute ratings from 0.2 to 70 microns. The all polypropylene filter is used extensively on corrosive and non-corrosive process fluids where broad chemical compatibility is required.
  • The vast surface area of the pleated filter matrix provides increased flow, high contaminant loading capacity and low initial pressure drop. This construction permits the use of smaller housings and reduced capital expenditure.
  • Betafine DP series filter cartridges are ideally suited for high flow, low viscosity fluids.
  • Betafine™ DP series pleated polypropylene filters are available with absolute ratings from 0.2 to 70 microns. The all polypropylene filter is used extensively on corrosive and non-corrosive process fluids where broad chemical compatibility is required.
  • High flow rates with lower pressure drops
  • Pleated Media for Greater Surface Area - Longer service life compared to non-pleated media , less down time due to fewer filter change-outs, Lower total filtration operating costs
  • High Flow Rates with Lower Pressure Drops, exceptional throughput, reduced processing time and reduced processing costs
  • Thermally Bonded, 100% Polypropylene Construction - Broad chemical and thermal compatibility, no media migration
  • FDA, CFR 21 Listed Materials of Construction - suitable for a broad range of applications, including Food & Beverage and Pharmaceutical applications
  • Filter Capsules offer sanitary vent and drain valves for ease of use, compact design with a variety of end connections
  • Varied lengths: Cartridge overall lengths will be mulitples of either 9¾" or 10" from 1,2,3, or 4 lengths with varied end fittings.
  • Made in USA, assembled in Australia