3M™ Organic Vapour Cartridge Filter 6051, A1, 1 Pair/Pack, 30 Packs/Case
- 3M Product Number 6051
- 3M ID 7100098275
- UPC 04054596182455
Details
Highlights
- Compy with AS/NZS 1716:2012 (Respiratory protective devices) to protect against a wide range of gases and vapours depending on the model selected. Use in accordance with AS/NZS 1715:2009 (Selection, use and maintenance of respiratory protective equipment)
- Bayonet-style connection fits a wide range of compatible half and full facepiece 3M™ Reusable Respirators
- Use with 3M™ Reusable Half Facepieces 6000 Series, 6500QL Series, 7500 Series and 3M™ Reusable Full Facepieces 6000 Series and Ultimate FX FF-400 Series
- Swept-back, low profile design for optimised field of view and balance
- Lightweight with low breathing resistance
- Quarter turn for a quick and easy installation
- Wide range of applications may reduce inventory needs
- Use for protection in hazardous environments . For workplace/occupational use only
3M™ Bayonet Gas & Vapour Filters have a bayonet-style connection that fits any half or full facepiece 3M™ Bayonet Reusable Respirators and they’re designed to optimise your field of vision. These filters offer lightweight and well-balanced breathing protection for a wide range of hazardous environments.
Common Applications/Hazards:
For protection when cleaning with or using organic solvents e.g. toluene, xylene and MEK.
- Also degreasing, mixing, using paint thinner, lacquers and glues
Protection Factors: Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels. This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
- With a 3M 6000/6500QL/7500 Series Half Face Respirator: for airborne concentrations up to 10 times the Workplace Exposure Standard (WES) or 1000 ppm, whichever is the lower
- With a 3M 6000/FF-400 Series Full Face Respirator: 50 x WES or 1000 ppm, whichever is the lower
Suggested applications
- Common Applications/Hazards: For protection when cleaning with or using organic solvents e.g. toluene, xylene and MEK. Also degreasing, mixing, using paint thinner, lacquers and glues
Typical Properties
Resources
