1. New Zealand
  2. All 3M Products
  3. Filtration & Separation
  4. Filter Cartridges & Media
  5. Degassing Membrane Contactors
  6. 3M™ Liqui-Cel™ EXF 4X28 Series Membrane Contactor G333, Polypropylene X40, SAN, FKM, Aligned, 1/Case

3M™ Liqui-Cel™ EXF 4X28 Series Membrane Contactor G333, Polypropylene X40, SAN, FKM, Aligned, 1/Case

  • 3M ID 70201350314

Microporous hollow fiber membrane in hydrodynamically optimized contactor designs that enable rapid and efficient gas transfer performance

Capable of achieving very low dissolved gas levels down to 1 ppb O2 and 0.5 ppm CO2 at outlet with proper system design

Membrane contactors operate without using chemicals, which could help reduce chemical use in some plant operations requiring dissolved gas control

View more details

Details

Highlights
  • Microporous hollow fiber membrane in hydrodynamically optimized contactor designs that enable rapid and efficient gas transfer performance
  • Capable of achieving very low dissolved gas levels down to 1 ppb O2 and 0.5 ppm CO2 at outlet with proper system design
  • Membrane contactors operate without using chemicals, which could help reduce chemical use in some plant operations requiring dissolved gas control
  • Array of product options with various materials of construction available
  • Compact, in-line operation with low pressure drop. May help save space, improve productivity, and decrease the number of required pumps

3M™ Liqui-Cel™ EXF Series Membrane Contactors transfer gases to and from compatible liquid streams. These membrane contactors utilize a microporous hollow fiber membrane inside a device designed to enhance flow dynamics and take full advantage of the large membrane surface area for stripping dissolved gases. With proper system design, ultra-low levels of dissolved gas can be achieved.

Our 3M™ Liqui-Cel™ EXF Series Membrane Contactors transfer gases to and from compatible liquid streams. These membrane contactors utilise a microporous hollow fiber membrane inside a device designed to enhance flow dynamics and take full advantage of the large membrane surface area for stripping dissolved gases. With proper system design, ultra-low levels of dissolved gas can be achieved.

The EXF Series are primarily used in process water treatment applications, operate inline, and do not require chemicals in operation. Products are available in a variety of materials that can handle flow rates from 3 gpm (0.7 m3/hr) up to 550 gpm (125 m3/hr) in a single unit. 3M™ Liqui-Cel™ Membrane Contactors can be connected in parallel or series configurations to handle even larger flow capacities and to achieve better degassing performance. Liqui-Cel membrane contactors can reach very low dissolved gas levels that can be difficult to reach with conventional gas removal technologies. Smaller flow capacity products, such as our EXF-2.5x8 and EXF-4x13 series can even be used in laboratories for feasibility testing and in low flow point-of-use applications, such as ultrapure rinse water in wet bench processing.

Why Dissolved Gas Control is Critical
Dissolved gases such as oxygen and carbon dioxide can cause any number of difficulties in industrial processes. They can oxidise and corrode metal piping and critical equipment, resulting in extra costs and downtime for maintenance. In industries such as semiconductor and display panel manufacturing – which depend on ultra-pure, de-aerated water – dissolved gases can affect both production efficiency and product quality. Deionisation by ion exchange columns is a technology commonly used in the production of high purity water. Carbon dioxide removal can help reduce operating costs and chemical use by reducing the frequency of bed regeneration cycles. In electrodeionisation (EDI), water quality may be improved by reducing the CO2 load that could hinder removal of target species, such as silica and boron. Oxygen in beverages promotes oxidation and reduces product quality, while other gases, like CO2 and N2 impact the beverage’s sparkle taste, and texture and need to be precisely controlled.

Potential Applications:

  • Deoxygenating boiler feed water
  • CO2 removal to reduce anion and mixed bed regeneration cycle frequency and to help improve water quality and efficiency of electrodeionisation systems
  • Deoxygenation of beverage product water to help protect product from oxidation and may extend shelf life
  • Carbonation and nitrogenation in beverage production processes to add the right amount of “Fizz” to improve sparkle, taste and texture
  • O2/CO2 removal in ultra-pure water processes to help improve yields and water quality
  • Degassing point of use rinsing water and other compatible process solutions in wet bench processes

About 3M™ Liqui-Cel™ Membrane Contactors
3M™ Liqui-Cel™ Membrane Contactors provide efficient dissolved gas control in a compact design. Capable of adding gases to or removing dissolved gases from compatible liquid streams, these gas transfer devices utilise hollow fiber membrane technology that may help facilities around the world improve operating efficiency, performance and protect product quality.

The presence of dissolved gases, such as oxygen, carbon dioxide, nitrogen and other non-condensable gases can cause a number of difficulties. Process interruptions, yield loss, corrosion, surface defects, unreliable measurement readings, poor product quality, higher operating costs and equipment inefficiency are a few examples of challenges faced by various industries when dissolved gases and air bubbles are not consistently controlled.

The 3M™ Liqui-Cel™ Membrane Contactor product offering includes products made with various materials of construction and a wide-range of flow capacities to meet process and application requirements. Their modular nature makes them easy to incorporate into systems with lower weight and less space than other conventional technologies, such as vacuum towers or forced draft deaerators. 3M™ Liqui-Cel™ Membrane Contactors do not require chemicals in operation and can be an effective alternative to chemical treatment options, such as oxygen scavengers in boiler feedwater or caustic/acid in reverse osmosis (RO) and other deionization systems. This may be particularly advantageous for facilities that want to reduce on-site chemical use as part of their sustainability goals.

How 3M™ Liqui-Cel™ Membrane Contactors Membrane Contactors Work
3M™ Liqui-Cel™ Membrane Contactors utilise microporous or non-porous, semi permeable hollow fiber membrane that is placed inside a contactor housing. In our EXF, SP, and MM-0.5x1 and MM-0.75x1 series membrane contactors, liquid flows around the outside of the hollow fiber membrane while a vacuum and/or sweep gas is applied to the inside of the hollow fiber during operation. In our other MM series membrane contactors liquid and gas flows are opposite: liquid flows inside of the hollow fiber membrane while a vacuum and/or sweep gas is applied to the outside of the hollow fiber.

Applying a vacuum or sweep gas creates a difference in the gas concentration levels between the inside (lumenside) and outside (shellside) of the hollow fiber membrane. This concentration difference is what drives rapid and efficient dissolved gas transfer.

Specifications