1. New Zealand
  2. All 3M Products
  3. Abrasives
  4. Abrasive Discs
  5. Foam Discs
  6. 3M™ Trizact™ Hookit™ Foam Abrasive Disc 30806, 8000, 150 mm, 15 Disc/Carton, 4 Carton/Case

3M™ Trizact™ Hookit™ Foam Abrasive Disc 30806, 8000, 150 mm, 15 Disc/Carton, 4 Carton/Case

  • 3M ID 60455103261

Eliminate or significantly reduce the compounding process by using 8000-grade 3M™ Trizact™ Hookit™ Foam Abrasive Discs before you polish.

Always used damp, they deliver long life and less loading than dry sanding.

Use 3M™ Trizact™ 8000-grade Foam Discs for refining 3000-grade and finer sand scratches on painted surfaces.

View more details

Details

Highlights
  • Eliminate or significantly reduce the compounding process by using 8000-grade 3M™ Trizact™ Hookit™ Foam Abrasive Discs before you polish
  • Always used damp, they deliver long life and less loading than dry sanding
  • Use 3M™ Trizact™ 8000-grade Foam Discs for refining 3000-grade and finer sand scratches on painted surfaces
  • Get a smooth, consistent finish with a sander — spending less time using a heavy polisher
  • Reduce your overall finishing time when you use our 8000-grade abrasives with other 3M™ Trizact™ Abrasives and one of the 3M™ Perfect-It™ Paint Finishing Systems
  • Compared to traditional finishing, using 3M™ Trizact™ Abrasives for removing sand scratches can reduce the possibility of heavy swirl marks, burn through, and other defects caused by more aggressive processes

3M™ Trizact™ Hookit™ Foam Abrasive 8000 Discs 443SA are extremely fine abrasive discs that help shorten or eliminate the compounding stage from your paint finishing process. Used to refine 3000-grade or finer sand scratches, they leave a surface so smooth you can start polishing without a compounding step.

Use 3M™ Trizact™ Hookit™ Foam Abrasive 8000 Discs 443SA to start the finishing process straight away at the polishing stage. They allow body shop technicians to use a lighter sander instead of a heavier polisher for removing 3000-grade and finer sand scratches. These long-lasting discs are designed to refine very fine sand scratches, which were traditionally refined with a compound liquid on a pad. They leave a smooth surface and reduce the risk of swirl marks, burn through, and other defects. In many cases, the technician can eliminate compounding and begin polishing straight away using either the 1-Step Polishing Process or the Random Orbital Polishing Process from 3M. 3M™ Trizact™ Abrasives deliver long life and a consistent finish thanks to an exclusive 3M construction. These discs have unique three-dimensional abrasive structures that expose fresh, sharp mineral as they wear. When used with other 3M™ Trizact™ Abrasives and as part of a 3M™ Perfect-It™ Paint Finishing System, they can reduce overall finishing time.

Typical Properties