1. New Zealand
  2. All 3M Products
  3. Tools & Equipment
  4. Spray Equipment
  5. Spray Guns & Components
  6. Sprayer Nozzles & Tips
  7. 3M™ Performance Gravity HVLP Atomising Head Refill Kit, 26730, Variety Kit, 5 kits per case

3M™ Performance Gravity HVLP Atomising Head Refill Kit, 26730, Variety Kit, 5 kits per case

3M ID 60455108708
  • Quick-change nozzles range from 1.2mm to 2.0mm for spraying a wide range of industrial and automotive coatings
  • Kit includes one of each size: 1.2mm, 1.3mm, 1.4mm, 1.6mm, 1.8mm, and 2.0mm
  • Like-new spray performance with each new atomising head
  • Use exclusively with the 3M™ Performance Spray Gun and 3M™ PPS™ Series 2.0 Spray Cup System
 More...
View all details
Specifications
Brand
3M™
Product Type
Atomizing Head Refill Kit
Details

3M™ Performance Gravity HVLP Atomising Heads Variety Refill Kit includes nozzles in six sizes ranging from 1.2mm to 2.0mm. Replaceable nozzles are built exclusively for gravity feed applications with the 3M™ Performance Spray Gun System and 3M™ PPS™ Series 2.0 Spray Cup System. Designed to deliver premium spray performance for coatings, including paints, clear coats and topcoats.

What makes the 3M™ Performance Spray Gun system different is the technology inside the quick-change replaceable nozzles. Because paint and coatings never pass through the body of the spray gun – and only the atomising head – it's like getting a brand-new spray gun every time you swap the nozzle. Get the pattern control, atomisation and transfer efficiency you expect from a premium spray gun — all while helping to drive more consistent spray performance across each job, every day.

3M™ Performance Gravity HVLP Atomising Head Variety Refill Kit includes one of each size: 1.2mm, 1.3mm, 1.4mm, 1.6mm, 1.8mm, and 2.0mm. Used for spraying a wide range of industrial and automotive coatings, including high-viscosity coatings, sprayable fillers, high-build primers, primer surfacers, sealers, single-stage top coats, solvent-based paints, waterborne paints and clearcoats.

The replaceable nozzles are used exclusively with the gravity-fed 3M™ PPS™ Series 2.0 Spray Cup System, which helps to reduce material waste, mess and contamination compared to traditional metal paint cups. Forget about tearing down spray guns and soaking in solvent. Our complete, integrated spray system is your path to smarter cleanup.

The atomizing heads attach to the 3M™ Performance Spray Gun needle and are tightly secured to the spray gun with a specially-designed locking collar. No additional tools required for changeouts. Simply remove the nozzle from the spray gun, and either appropriately clean the fluid tip or replace it to keep your spray gun performing like new.

  • Quick-change nozzles range from 1.2mm to 2.0mm for spraying a wide range of industrial and automotive coatings
  • Kit includes one of each size: 1.2mm, 1.3mm, 1.4mm, 1.6mm, 1.8mm, and 2.0mm
  • Like-new spray performance with each new atomising head
  • Use exclusively with the 3M™ Performance Spray Gun and 3M™ PPS™ Series 2.0 Spray Cup System
  • Excellent pattern control, atomisation and transfer efficiency|| Excellent pattern control, atomisation and transfer efficiency