3M™ Particulate Filters 5935, P3 R, 80 EA/Case
- 3M Product Number 5935
- 3M ID 7000037675
- UPC 04046719604012
Details
Highlights
- Comply with AS/NZS 1716:2012 (Respiratory protective devices) for environments containing particulates. Use in accordance with AS/NZS 1715:2009 (Selection, use and maintenance of respiratory protective equipment)
- Use with 3M™ Gas and Vapor Cartridges, 6000 Series and or 3M™ Filter Adapter 603
- Held in place by required 3M™ Filter Retainer, 501
- Allows for replacement of particulate filters prior to change out of gas & vapour filters for cost savings
- Filters can help reduce inhalation exposures to a wide range of dusts, mists and other particles, including certain airborne biological particles
- Advanced Electret Media (AEM) is designed to provide lightweight, easy breathing comfort
- Simple to install
- Use for protection in hazardous environments . For workplace/occupational use only
3M™ Bayonet Particulate Filters can be attached to 3M™ Bayonet Gas & Vapour Filters 6000 series to provide particulate protection from certain solid and liquid particles when used with 3M™ Bayonet Reusable Respirators. Use the 3M™ Filter Retainer 501 to attach one filter to each gas/vapour filter.
Protection Factors:
Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels. This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
- With a 3M 6000/6500QL/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
- With a 3M 6000/FF-400 Series Full Face Respirator: for particles, for airborne concentrations up to 100 x WES
Typical Properties
Resources
