1. Demystifying fall protection...learning your ABC’s!
3M Safety
  • Share

    Demystifying fall protection...learning your ABC’s!

    October 31, 2018
    Share

     

     

     

     

     

     

    Demystifying fall protection...learning your ABC's!

    Countless hours have been spent in convincing employers to provide safety footwear to prevent the risk of toes being lost, on ear muffs to prevent hearing damage and gloves to prevent cut fingers. Having said that, the Safety industry has always emphasised the importance of using fall protection equipment to protect workers operating at height. However, they have also shrouded the principles of height safety in mystery, and this has not helped the industry grasp a basic understanding of the principles involved in equipment that saves lives.

     
    • Link1

        In 2017, a total of 32 Australian
      and New Zealand workers died as
      a result of a fall from height,1 with
      countless others seriously injured.2

      The effects of a fall on a work site are far reaching and go beyond the company to the family members and even the community. Most of these injuries and deaths are totally needless because they could be avoided with the right fall protection gear, used the right way.

    The principles of height safety.

    While fall protection is a complicated issue and details of your local laws and regulations, codes of practice and standards all need to be considered and understood, there are basic rules and principles that need to be followed to increase the safety of people working at height.

     

    • 1. Any person working at a height (i.e. leaving the ground) must be protected.
    • 2. The hierarchy of control, implemented following a risk assessment, demands that the first step is to try and “engineer out” the need to work at height.
    • 3. If this is not possible, the next step is to prevent access to the height safety risk area by the provision of lock out systems, guard rails etc.
    • 4. Only when these alternatives prove impossible and access to the risk area is required should the last option of the provision of protective equipment be used.

     

    There are two common systems of fall protection. The first is called Restraint, where the fall protection system prevents the employee from reaching the position where a fall may be possible. The second is Fall Arrest, where the fall protection system must assume that a fall is possible. Even when using a Restraint system, all equipment must be Fall Arrest rated.

    The ABC’s of fall protection.

    Choosing the right equipment to use when working at height can be a difficult job, however, there are six key components that should be considered to protect yourself, and those around you, when working at height: Anchorages; Body Support; Connectors; Descent/Rescue, Education and Fall Protection for Tools.

    The A, B, C, D, E & F of fall protection cover the fundamental requirements of every personal fall protection system and serves to remind you of the key elements required when working at height.

    • A - Anchorages

      Anchorage provides a secure point of attachment (to an existing structure) for the fall arrest system. Anchorage devices can be permanent or temporary and vary to suit the type of structure available. This can be a fixed point or a static line system, but it must be capable of sustaining a force of 15 kN for a single person application and 22 kN for a two person application.

       
    • B – Body support

      Full body harnesses connect the worker to the fall arrest system. They are specially designed to protect the worker against serious injury in the event of a fall, whilst also remaining comfortable to wear. Use only a standards approved full body harness that is within service, inspected prior to use and correctly fitted and adjusted. View our article: The Full Body Harness – why putting it on is not enough!

       
    • C – Connectors

      Connectors are devices that connect the full body harness to the anchorage system. They can be single products or multiple devices working together. This can be a shock absorbing lanyard with a maximum working slack of 2 metres or a self-retracting lifeline (SRL).

       
    • D – Descent/rescue

      Descent and rescue systems enable the retrieval of an injured or incapacitated worker. In the event of a rescue, this equipment facilitates rapid recovery of the worker without endangering other workers in the process.

       
    • E – Education

      Education is essential to ensure at height workers are thoroughly trained to carry out tasks in a safe and efficient manner.

       
    • F - Fall protection for tools

      Fall protection for tools help make work environments safer and more productive by reducing dropped object incidents. View our article: What you need to know about fall protection for tools.

       

    Dedicated to bringing every worker at height home safely.

    Finally, and most importantly, never use fall protection equipment without first receiving competency based training in working at heights and with fall protection equipment. There are many other aspects of fall prevention that must be considered prior to working at height, as incorrect use may lead to severe injury or even death in the most severe circumstances.

    Our fall protection products deliver the highest standards of protection for workers in the deepest of mines through to the top of the tallest towers. However, on any given shift, workers may potentially put themselves in harm’s way - the importance of selecting the correct equipment, its regular inspection and maintenance and user training are all critical issues requiring further understanding and possibly specialist advice. This article is a general guide, reach out to a 3M Fall Protection Specialist if you’re unsure of any aspect of fall protection or fall protection equipment.

    View the range of height safety solutions on offer from 3M Fall Protection.

    References:

    1.

    Workplace fatalities: falls from a height
    Country 2017 Source
    Australia 26 Safe Work Australia, Notifiable Fatalities December 2017 Monthly Report.
    New Zealand 6 Worksafe NZ - worksafe.govt.nz/data-and-research/ws-data/fatalities/: Table 2. WorkSafe Fatalities Detail
    Total 32  

    2.

    Serious injury claims: falls from a height
    Country 2015 - 2016 Source
    Australia 6,465 Safe Work Australia, Australian Workers’ Compensation Statistics, 2015-16.