Help make sure your restaurant's water system is ready to serve customers effortlessly.
Setting The Table For A Successful Business
-
As you manage your business, there are a lot of details you have to get just right to help ensure your success—including maintaining your water system. Operate smoothly by refreshing your water system to provide high quality water for drinking, ice, cooking and more.
Please follow the instructions below to ensure consistent performance when the system is returned to normal operation. Always follow user manual instructions specific to your product.
Why is it important to properly shut down and restart your 3M Water Filtration System? Inside your cartridge is our Integrated Membrane and Pre-Activated Carbon Technology (“I.M.P.A.C.T.”). This three stage system provides filtration you can count on to help reduce contaminants that may be in your water—and performing a proper shutdown is a great way to help keep it operating as intended.
-
● Sanitary Quick Change
Encapsulated cartridge design allows for fast and easy cartridge change-outs without contamination.
-
Stage 1: Pre-Filtration
Non-woven filtration media that reduces larger size particles to help increase sediment holding capacity of the filter.
-
Stage 2: Fine Filtration
3M proprietary two-zone microporous pleated membrane that reduces 99.99% of protozoan cysts and helps provide excellent sediment life with minimal pressure drop.
-
Stage 3: Final Filtration
Activated Carbon Filtration; 3M carbon block technology for reduction of lead, chlorine and odour and for improved taste.
Restart Steps – For systems decommissioned for less than 6 weeks
-
1. Opening the flush valve of a 3M™ High Flow Series Multi-Equipment Filtration System Model DP290.
-
2. Flush the system to drain for at least 5 minutes.
-
3. Close the flush valve or downstream valve. System is now ready for use.
Restart Steps – For systems decommissioned for 6 weeks or more
-
1. Discard the old filter cartridges.
-
2. Replace with new cartridges per the cartridge installation instructions.
-
3. Open the filter inlet water valve and check for any leaks.
-
4. Open filter flush valve or downstream value to flush the system per the filter’s recommended flush instructions included on the Performance Data Sheet.
-
5. Close the flush valve or downstream valve. System is now ready for use.
4 Simple Steps to Shutdown
-
1. Make sure the equipment connected to the filtration system is shutdown and close the inlet water valve of the filtration system.
-
2. Open the filter flush valve or downstream valve for a few seconds to relieve pressure in the system.
-
3. Close the flush valve or downstream valve.
-
4. Leave cartridges in place installed in the heads.
New Zealand Customer Service:
0800 808 182
New Zealand Customer Service:
0800 808 182
